Here is the URL to the Radio-SkyPipe update you will need to use the UDS serial port communication channel. A full installation of this version is not yet available. If you do not already have Radio-SkyPipe II, you should go here and get your free copy, and then do the update below.
Tuesday, February 26, 2013
A New StartThis is my new effort at blogging. This will replace the Radio-Sky Journal which I never was able to be productive at. I am hoping for better now. My current intent is to make this blog more than just an amateur radio astronomy place. All sorts of amateur science will be incorporated. This can run the gamut from biology to hardware hacking. Sometimes, content will be directly related to my products, however, often it will not.
Arduino and Radio-SkyPipe
Lets get started with something I am really excited about, connecting Radio-SkyPipe (RSP) to Arduino devices. I will describe the details of the project on a static web page, but let me introduce you to the basic ideas here. Radio-SkyPipe is my data-logging PC based strip chart program.. It is written in VB6 which for now still seems to work on Windows computers. Originally, the program only allowed for input via the sound card or a homebrew analog to digital converter connected to the parallel port (remember those?). In 2009, I created a open source protocol for other devices to send chart data to RSP. I called this the UDS (User Data Source) model. The protocol requires the recognition of few commands and proper formatting of the data being sent to RSP for plotting.
For every UDS that I had created, I wrote corresponding UDS executable program that stood between the data collection device (usually an analog to digital converter or ADC) and RSP. I was using whatever protocol was native to the device to communicate with it and translating to feed RSP. The data flowed between the UDS execuatable file and RSP over a simple TCP connection in which the UDS exe acted as a server.
Last year I began working with Arduino hardware for a privately contracted project. We ended up abandoning Arduino because of speed concerns, but I was taken by these devices and all of the inexpensive hardware that could be easily interfaced to them. Several weeks ago I received an email from Jonathan Rawlinson regarding a project he was working on in which he was communicating with an Arduino to Radio-SkyPipe not by the serial line directly but via a TCP-RS232 converter program. The Arduino was handling the protocol and the converter program simply acted as the TCP route to RSP.
I decided to use a little different approach than Jonathan and to generalize the code so that it could be used by anyone writing an Arduino sketch (program). I decided it was a practical thing to remove the TCP-Serial converter program and talk directly to the Arduino via its com port connection. So RSP now has a com port associated with it and may exchange UDS commands and data over the serial connection without the aid of TCP. If you have a TCP UDS, don't worry. Both connection types are supported.
|The old UDS method is shown on the left. RSP 2.5.0 provides a direct connection via a serial port to devices like the Arduino.|
The hookup details and code are given here. I am sure that improvements can be made and that many different approaches could be taken to facilitate the UDS protocol in Arduino. I welcome your contributions to this effort.
Solar activity captured by K4LED using a RX888 SDR and Radio-Sky Spectrograph. Radio-Sky Spectrograph (RSS) is a free Windows program that ...
One of the limitations of the RTLSDR dongle receivers is that it is hard to get more than about 2.4 MHz of bandwidth from them. Raydel Abr...
ATT-6000 electronic rf step attenuator and its serial computer interface. I am amazed at the useful electronic test equipment the amate...